Shelly Qubino Wave i4DC

With the Shelly Qubino Wave i4 DC, you use your wall switch (5-24VDC) to wirelessly switch your other z-wave devices or start scenes (scenarios.) Easily create smart scenes (scenarios) and activate them with 1 of the 4 inputs, e.g. all your lights off with 1 push of a button, for when you go to sleep. So the Shelly Wave i4 works like a remote control, but connected to 5 to 24VDC behind a wall switch.

Shelly Qubino Wave i4 DC, new, faster and safer

The Shelly Qubino Wave i4 DC has the latest Z-wave S800 chip on board, connects to 5-24VDC, and has 4 inputs that you can connect to a wall switch. Works perfectly in combination with e.g. the Gira 4-fold basic unit push button or the JUNG 4-fold multipulse push button, or any other brand. This allows you to control a variety of scenes or devices, such as a Shelly Wave relay or smart Z-wave plugs. Fully Wireless, with up to 4 inputs for 3 actions per button and thus up to 12 functions;
- On/Off (rocker switch)
- On/Off Short press (rotary switch)
- Long press (pulse button)
- 2x Short press (pulse button)
CAUTION: the Shelly Wave i4 DC therefore has no outputs, so you cannot directly connect a lamp or device to it.
The Shelly Wave i4 for 230VAC is also available.

The Wave i4 DC requires a Z-wave gateway/Hub and is easy to pair via SmartStart. S2 authentication ensures a secure connection and through OTA (Over The Air) updates you can easily install the latest firmware version.

For example, simply install the Shelly Qubino Wave i4 DC behind a 5-24VDC wall switch and connect the Z-wave Module to your Z-wave Gateway/Hub. After that, you can set the switch for starting smart scenes (scenarios) or controlling other Z-wave devices.

Works with

* FIBARO Home Center 3 or Lite from version 5.140

FEATURES

Pros & Cons

	Works via Z-wave Plus 800S 868Mhz
	SmartStart for easy connection
	Secure S2 authentication
	5-24VDC
	Has only 4 inputs
	Direct switching via Z-wave Associations
	Works as a Z-wave repeater (Z-wave Mesh-Network)
	Easy to install
	Built-in, rear (wall) switch
	Works with switch, pulse switch
	Scene activation via App
	OTA firmware updates
	2 Year Carry-in Warranty
	Blue neutral wire required for connection

DOWNLOADS

	Shelly Qubino Wave i4 DC Product presentation (ENG)
	Shelly Qubino Wave i4 DC Manual (ENG-Multi)